Parts gallery
Twelve example parts. Filter by process, material or industry; the filter is kept in the link so you can share it.
Sample parts, shown to illustrate capability.
Hydraulic manifold block
Manifold with intersecting angled holes, one 5-axis setup.
- Part size
- 160 × 110 × 80 mm
- Tolerance
- Hole position 0.02 mm
- Batch size
- 400 pcs
Valve spool
Hardened and ground proportional valve spool.
- Part size
- Ø 16 × 120 mm
- Tolerance
- Ø 16 g5, Ra 0.2 µm
- Batch size
- 2,000 pcs
Sensor housing
Threaded stainless sensor housing with a cross hole.
- Part size
- Ø 12 × 28 mm
- Tolerance
- ±0.01 mm
- Batch size
- 25,000 pcs
Brass connector
Threaded brass connector for a quick coupling.
- Part size
- Ø 18 × 32 mm
- Tolerance
- ISO 2768-f
- Batch size
- 40,000 pcs
Gearbox shaft
Induction-hardened shaft with ground bearing seats.
- Part size
- Ø 45 × 410 mm
- Tolerance
- Ø 40 k6
- Batch size
- 3,500 pcs
Pump impeller
Closed stainless impeller, machined on 5 axes.
- Part size
- Ø 210 × 60 mm
- Tolerance
- ±0.02 mm
- Batch size
- 150 pcs
Robot gripper plate
Anodised gripper plate with weight-saving pockets.
- Part size
- 320 × 240 × 20 mm
- Tolerance
- ISO 2768-m
- Batch size
- 20 pcs
Blanking die insert
Hardened tool-steel die insert cut by wire EDM.
- Part size
- 120 × 80 × 30 mm
- Tolerance
- ±0.005 mm, 60 HRC
- Batch size
- 4 pcs
Bronze bearing bush
Bronze bush with lubrication grooves.
- Part size
- Ø 60 × 50 mm
- Tolerance
- Ø 45 H7
- Batch size
- 1,000 pcs
PEEK insulating bush
PEEK bush for electrical insulation at high temperature.
- Part size
- Ø 40 × 25 mm
- Tolerance
- ±0.02 mm
- Batch size
- 500 pcs
Cylinder end cap
Hydraulic cylinder cap with seal grooves and thread.
- Part size
- Ø 110 × 45 mm
- Tolerance
- Seal groove Ø 80 H8, Ra 0.8 µm
- Batch size
- 800 pcs
Battery cooling plate
Aluminium cooling plate with internal channels, leak tested.
- Part size
- 420 × 180 × 16 mm
- Tolerance
- Flatness 0.05 mm
- Batch size
- 1,500 pcs
Nothing matches these filters.
Have a drawing?
Send it with the quantity you need. We check manufacturability and quote complete drawings within 2 working days.