ISO 9001 quality management system
ISO 9001:2015
Quoting, production, inspection and shipping follow written procedures, audited every year by an independent body. For the buyer, every batch is made under the same traceable system.
Quality
We show that a part matches its drawing by measuring it. Every new part goes through first article inspection; in series production, critical dimensions are measured to the control plan and records are kept by batch number.
From drawing to shipment
Drawing review
At quotation we check tolerances, material and surface requirements and ask about anything unclear in writing.
First article inspection
The first part is measured in full on the coordinate measuring machine and reported.
In-process control
Operators measure critical dimensions at the frequency in the control plan; series parts are charted for SPC.
Final inspection and documents
Before shipment, final inspection follows a sampling plan; the requested documents travel with the batch.
Measuring equipment
| Equipment | Range | Units |
|---|---|---|
| Coordinate measuring machine (CMM) | 700 × 1000 × 600 mm | 1 |
| Contour and surface roughness tester | Ra, Rz; 0.01 µm resolution | 1 |
| Optical measuring machine | Ø 0.5–120 mm | 1 |
| Digital height gauge | 0–600 mm | 2 |
| Hardness tester | HRC, HV | 1 |
Documents we supply
- EN 10204 3.1
- The material maker's inspection certificate: chemical analysis and mechanical values.
- FAI
- First article inspection report: the measured value of every dimension on the drawing.
- PPAP
- Automotive production approval file (levels 1–5): control plan, FMEA, capability studies.
Certificates
IATF 16949 automotive quality management
IATF 16949:2016
The quality system for the automotive supply chain: PPAP, control plans, FMEA and statistical process control. For the buyer, series parts are made with an approved process and measured capability.
Have a drawing?
Send it with the quantity you need. We check manufacturability and quote complete drawings within 2 working days.